Docomo FOMA D702iF, Manuals, Page: 350 / 451

348
C
h
ar
ac
te
r E
n
tr
y
Copying/cutting characters
Copying characters
1
m1
on the character entry screen
･
To cut the characters:
m2
･
On the entry screen for mail message, press
m
and select Copy / Cut .
2
Place the cursor at the start point
z o
･
To select the whole sentence:
mo
･
To select whole sentence on the entry screen
for mail message:
a
3 Place the cursor at the end point
z
Press
o
The characters in the selected range are copied.
･
To select from the start point to the beginning:
mo
･
To select from the start point to the end:
po
Pasting characters
･
When the pasted phrase exceeds the number of
characters permitted in the edited sentence, a
message appears indicating that all characters will
not be able to be pasted. When you select
Yes
, the
allowable number of characters is pasted.
1
Place the cursor at the location to paste on
the character entry screen
z
Press
m3
･
On the entry screen for mail message, press
m
and select
Paste
.
INFORMATION
●
When the type of the copied/cut characters does not
match with the character type used in the destination
field, pasting is disabled. For example, hiragana or kanji
cannot be pasted into the mail address field (one-byte
alphanumeric).
●
When a character string containing a line feed is pasted
into an entry screen that cannot contain any line feeds,
the line feed is replaced by a blank.
Entering characters using codes
KUTEN Code Input
Characters, numbers and symbols on the KUTEN
code list are entered using 4-digit code.
Entering “ 携 ” (code number 2340)
1
m
on the character entry screen
z
Select
Phrase/Kuten/Quote
z 2
2
Enter the 4-digit code (
2340
in this case)
･
The available code range is 0101 to 8406.
･
Entry of codes without characters, numbers
and symbols is invalid.
Registering frequently used words
Save Word
Using registered readings makes it easy to
convert characters.
･
Up to 200 words can be saved.
1
m8811
2
Select
<New word>
･
To edit the registered word: Select a word to
edit
･
To check the registered word: Highlight a word
z
p
You can edit it by pressing
o
.
■ Deleting words:
a
Highlight a word to delete
z m
b
Select
Delete
･
To delete all: Select Delete all .
3 Select
Word
field
z
Enter the word to
register (up to 24 one-byte or 12 two-byte
characters)
･
The following character types can be
registered:
･
One-byte/two-byte alphabets
･
Hiragana/kanji
･
One-byte/two-byte katakana
･
One-byte/two-byte numeric
･
One-byte/two-byte symbol
･
Pictogram
Example
Example
KUTEN Code
Inpu
t