Docomo FOMA D702iF, Manuals

Page: 342 / 451

340
Data
Com
m
uni
ca
ti
on
Communication configuration file (driver)
Install the communication configuration file on a PC
from the attached CD-ROM before connecting FOMA
terminal to a PC to perform packet or 64K data
communication.
FOMA PC configuration software
When the FOMA PC configuration software (found on
the CD-ROM) is installed on a PC, a number of
settings required for packet communication or 64K
data communication via connection between FOMA
terminal and PC can be made from the PC by simple
operation.
Checking operating environment
Use the communication configuration file and the
FOMA PC configuration software in the following
operating environments:
*1 USB port (conform to USB specification 1.1/2.0) is
required.
*2 The operation from OS upgrading is not covered by
the warranty.
INFORMATION
●
Note that utilization may not be possible in certain
operating environments. Furthermore, operation will not
be guaranteed in an environment other than that
described above or by upgrading the OS and DoCoMo
assumes no responsibility for operation under such
conditions.
AT command
AT commands are commands for setting FOMA
terminal functions using a PC.
FOMA terminals comply with AT commands and
support some extended commands and
proprietary AT commands.
For details of AT command, see “Manual for Data
Communication” in CD-ROM provided.
Item Requirements
PC*
1 PC/AT compatible computer
OS* 2 The Japanese version of
Windows 2000 or XP
Memory
requirements
Windows 2000: 64MB or more
Windows XP: 128MB or more
Hard disk capacity 5 MB or more free disk space
AT comm
and