Docomo FOMA D702iF, Manuals

Page: 263 / 451

261
i-
channel
Basic channels are available for free of service
charge for a set period of time to i-mode subscribers
who use an i-channel compatible terminal, and who
have never signed up for the subscriber line. Note
that the packet communication fee caused by viewing
the detail information on the channel list is to be
borne by the customer.
･
For important notes on using Trial channel and
detail information about how to use the service, see
“i-mode User’s Manual”.
In principle, Trail channel automatically starts after a
set period of time once the UIM (FOMA card) is
inserted and the i-channel compatible terminal goes
into use. If Trial channel does not start automatically,
you can start it by pressing
c
. Trial channel is
available only once per subscriber line.
Trial channel automatically stops after a certain
period of time following the start. For information
about how to manually stop the channel, see “i-mode
User’s Manual”.
INFORMATION
●
Neither ring alert nor vibrator operates at the reception of
information. Likewise, the sub-display does not light or
flash.
● If you cancel i-channel or i-mode service subscription,
tickers are no longer displayed. Pressing
c
displays
the pre-subscription screen. Until the cancellation
procedure has finished, however, tickers may be
displayed on the screen and pressing
c
may display
the last received information in the channel list.
● When Show ticker is set to No in Ticker Setting, no tickers
are displayed.
● If you cannot receive the information because the power
of FOMA terminal is turned off or due to out-of-service
area or poor signal condition, press
c
to receive
information.
● blinks while receiving information.
Menu 271
Displaying i-channel
Channel List
1
c
The channel list appears.
･
When video/i-motion, Chara-den or i-
α
ppli is
set for the standby display:
d71
･
i-channel cannot be displayed even if
c
is
pressed.
2 Select a channel
Your terminal connects to the site and the detail
information appears.
･
Depending on the use situation, the information
may be received when displaying the channel
list.
INFORMATION
●
To redisplay the channel list, press
m
in the channel list
and select Retry .
●
When you press
m
in the channel list and select
Sound
effect setting , you can set whether to enable sound effects
for Flash movie. For setting, follow the procedure in
“Setting image display and sound effects”.
☛
P192
Trial channel
Changing the i-channel host
You can change the i-channel host (Usually, you
do not need to change it).
a
d87
b
Highlight the user host
z m z
Enter the
terminal security code
c
Select each item to set
z p
･
Host address2
should be filled with the address
of the i-channel host (up to 30 one-byte
characters).
･
Host address
is the host for i-mode.
☛
P191
d
Select the host you have edited
z p
● If you enter or change the address of
Host
address2
, the i-channel information will no longer
be displayed as tickers on the standby display.
Sometimes, the information may not be updated
automatically. When you press
c
on the
standby display to view the channel list, the
latest information is received and the tickers are
displayed on the standby display.
Chann
e
l Lis
t