Docomo F-08A, Manual, Page: 426 / 462

5
DOCOMO Connection Manager
When DOCOMO Connection Manager (found on the attached CD-ROM) is installed on a PC, a number of
settings required for packet communication or 64K data communication can be simply operated from a PC.
Precautions for installation/uninstallation
I
Before starting operation, make sure that no other program is running and exit the program if any.
* Exit any resident programs on Windows including antivirus software.
Example : Right-click the icon displayed in the task bar, click "
閉じる
(Close)" or "
終了
(End)".
I
For installing/uninstalling FOMA communication configuration file or DOCOMO Connection Manager,
make sure that a user with administrator's privilege performs the operation. Installing/uninstalling the
software by other users may produce an error. For Windows Vista, when the
"
ユーザーアカウント制御 (User Account Control)" screen appears, click " 許可 (Permit)" or "続行
(Continue)", or enter the password and click "OK". For details on PC administrator privileges, contact your
PC manufacturer or Microsoft Corporation.
I
For operations of a PC, settings of administrator privileges, etc., refer to the Instructions Manual of the
PC.
Connecting up PC to the FOMA terminal
The method of inserting and removing USB cable are explained here. FOMA communication
configuration file is not installed.
→ P6
I
If you connect FOMA terminal to a PC before installing FOMA communication configuration file,
Windows may automatically detect that USB cable has been inserted and request the driver. Click "
キャ
ンセル
(Cancel)" to end.
I
The connection should be made with PC and FOMA terminal both turned ON.
I
The description in this manual takes the case with FOMA USB Cable with Charge Function 02 (optional)
for example.
Inserting USB cable
1
Insert the connector of the USB cable into FOMA terminal's external
connection jack.
2
Insert the other end of the USB cable connector into the PC USB port.
･
When a PC and FOMA terminal are connected, appears on the stand-by display of FOMA
terminal.
Open the jack cap. Connector
Face up the front side
shown with a stamp,
seal, etc.