International roaming
175
■
Charging
Use the AC Adapter 03 (optional), AC Adapter 04 (optional), AC
Adapter F05 (optional) or AC Adapter F06 (optional) when you
charge the battery overseas.
■
Usage charge
Overseas usage charges (call and packet communication)
differ from those in Japan.
･
Since some applications automatically perform
communications, packet communication charges may
become high. For operation of applications, contact the
application providers.
◆
Advance preparation
■
Setting network service
If you subscribe to network services, you can use network
services such as Voice Mail Service, Call Forwarding Service,
Caller ID request service, etc., even overseas. Some network
services are not available.
･
To use network services overseas, you need to set Remote
access to activate. You can set Remote access in the country
you visit.
･
Even if the setting/canceling operation is available, some
network services cannot be used depending on overseas
network operators.
◆
After arriving overseas
When you arrive overseas and turn the terminal ON, a
connection to the available network is established
automatically.
■
Connectivity
When you have set [Network operators] in [Mobile networks]
to [Choose automatically], optimum network is automatically
selected.
When you use a network operator of a country/region covered
by the flat-rate service, you can use the service with flat-rate
packet communication charges overseas up to the specified
upper limit per a day. To use this service, subscription of
packet flat-rate service in Japan is required. For details, refer to
"Mobile Phone User's Guide [International Services]" or
DOCOMO International Services website.
■
Display
･
During international roaming,
appears on the status bar.
The terminal works in a 3G network and GSM/GPRS network
service area. Also, it works in countries or districts where 3G
850 MHz/GSM 850 MHz is applied.
･
You can confirm the name of the connected network
operator on the Notification panel.
■
Date & time
When [Automatic date & time]/[Automatic time zone] in [Date
& time] is marked, the date, time and time differences of the
terminal are corrected by receiving information related to time
and time differences from the network of overseas
telecommunications carrier you connect to.
･
Correction of the time or time differences may not be
performed correctly depending on the network of overseas
network operator. In that case, set time zone manually.
･
Timing of correction varies by the overseas network
operator.
･
"Date & time"
→
P157
Summary of Contents for F-07E
Page 1: ...INSTRUCTION MANUAL ...
