Docomo F-05A, Instruction Manual, Page: 94 / 405

92
Sound/Screen/Light Settings
2
Select the Color field
e
Select a lighting
color
e p
◆
Setting lighting pattern and color
during GPS <GPS light alert>
1
m e 8265 e
Select Lighting
pattern field
e
Select a lighting pattern
･
"Sync melody" cannot be selected. "OFF" cannot
be selected for Loc. request-accept or Loc.
request-verify.
2
Select Light color field
e
Select a lighting
color
e p
◆ Setting lighting for closing FOMA
terminal <Open/close>
1
m e 8261 e
Select Open/
close
Time+Wheel : After clock appears on the sub-display
section, the light turns on according to Wheel
operation.
→
P31 "
■
When displaying clock"
Time+Random : After clock appears on the sub-
display section, the light turns on at random.
Time+Custom 1-10 : After clock appears on the sub-
display section, the light turns on in the pattern
created with ひかりクリエーター (Light creator) or
downloaded light data.
Time only : Clock is displayed on the sub-display
section.
OFF : Cancel Open/close.
✔
INFORMATION
･
Even when "Sync melody" is set for Light pattern, lighting
may not synchronize depending on the melody
specifications.
･
When lights are ON, the phenomena below may occur.
They are caused by characteristics of LEDs used for lighting
or FOMA terminal, not defects of FOMA terminal.
- The lighting color and/or brightness differs among FOMA terminals
or depending on lights.
- The actual lighting color may seem to discord from the lighting
color name depending on painting color of FOMA terminal.
◆ Turning the light ON at minutes 00
every hour <Top of hour light>
1
m e 8264
2
Select required items
e p
Setting : When "Specified time" is selected, "Start
time: " and "End time: " can be set. When an item
other than "OFF" is selected, "Top of sound" can
be selected.
Top of sound : When an item other than "OFF" is
selected, "Volume" can be selected.
■ When Top of hour light is set
The light blinks for approximately 3 seconds at minutes 00
every hour of the set time and a clock is displayed. With
Top of hour light set, Top of sound is emitted.
･
If a clock or other information is displayed on the sub-
display section, Top of hour light does not operate.
･
The light color changes by time.
New announcement
Displaying spot animation when
there is newly arrived information
When there is newly arrived information (unchecked
missed calls, unread messages or unchecked recorded
messages), a spot animation appears on the stand-by
display. It can be set for all incoming calls, individual
party or phonebook group saved in phonebook.
･
Up to 16 items can be registered.
<Example> When "By specified contact" is selected
1
m e 822
2
p e 1
-
3
･
When "All incomings" is selected, go to Step 4.
Deleting settings : Place the cursor on the setting to
delete and
m e 3
or
4 e
"Yes"
･
When deleting all items, perform authentication.
Changing settings : Select the setting to
change
e
Go to Step 4
: By specified contact (Phone)
: By specified contact (UIM)
: Group (Phone)
: Group (UIM)
: By specified contact with UIM used for setting
not installed
: Group with UIM used for setting not installed
: All incomings
: Action for incoming is OFF