Docomo F-05A, Instruction Manual, Page: 395 / 405

38
AT+CAOC Display last call cost.
AT+CAOC
+CAOC : "000024"
OK
AT+CBC Display FOMA terminal's battery level in the "+CBC : <bcs>,<bcl>" format.
bcs=0 : Powered by the battery pack
bcs=1 : Not powered by the battery pack
bcs=2 : Battery pack removed bcs=3 : Power-supply error
bcl=0 : No battery remained or battery pack removed
bcl=1-100 : Battery remained
AT+CBC=? : Display a list of displayable values
AT+CBC
+CBC : 0,100
OK
AT+CBST=<n>,1,0
*1
Set the line to use (Setting of bearer service)
n=116 : 64K data communication (default)
n=134 : 64K videophone
AT+CBST? : Display current settings
AT+CBST=? : Display a list of assignable values
AT+CBST=116,1,0
OK
AT+CEER Display reason for disconnection of immediately preceding communication.
Disconnection reason list
→
P41
AT+CEER
+CEER : 36
OK
AT+CGDCONT
*2
Set dialup connection (APN) for packet communication.
→
P41
→ P41
AT+CGEQMIN
*2
Set the criteria for judging whether to permit QoS (Quality of Service) provisioned by the
network when packet communication is established.
→
P42
→ P42
AT+CGEQREQ
*2
Set QoS (Quality of Service) requested to the network at the transmission of packet
communication.
→
P42
→ P42
AT+CGMR Display FOMA terminal version.
AT+CGMR
1234567890123456
OK
AT+CGREG=<n>
*1
Set whether to report network service registration status. The status reported is Within
service area or Out of service area.
n=0 : Not notified (default)
n=1 : When the terminal is moved from Within service area to Out of service area or vice
versa, the status is reported in the "+CGREG : <stat>" format.
stat=0 : Out of service area stat=1 : Within service area stat=4 : Unknown
AT+CGREG? : Display the current settings and status in the "+CGREG : <n>, <stat>" format
AT+CGREG=? : Display a list of assignable values
AT+CGREG=0
OK
AT+CGSN Display FOMA terminal serial No.
AT+CGSN
123456789012345
OK
AT+CLIP=<n>
*1
Set whether to display sender's caller ID on a PC when receiving 64K data communication.
n=0 : Not display result (default)
n=1 : Display result
AT+CLIP? : Display the current settings and status in the "+CLIP : <n>,<m>" format
m=0 : Network setting not to send caller ID when sending data
m=1 : Network setting to send caller ID when sending data
m=2 : Unknown
AT+CLIP=? : Display a list of assignable values
AT+CLIP=0
OK
AT+CLIR=<n>
*2
Set whether to send phone number to the receiver when sending 64K data communication.
n=0 : Use the setting in service agreement
n=1 : Not send
n=2 : Send (default)
AT+CLIR? : Display the current settings and status in the "+CLIR : <n>,<m>" format
m=0 : CLIR not operating (always sends)
m=1 : CLIR operating (never sends)
m=2 : Unknown m=3 : CLIR temporary mode (default=does not send)
m=4 : CLIR temporary mode (default=sends)
AT+CLIR=? : Display a list of assignable values
AT+CLIR=2
OK
Upper slot : Command
Lower slot : Example
Description