Docomo F-05A, Instruction Manual, Page: 251 / 405

249
Convenient Functions
･
You can start a new function by pressing
m
on
the Switch Task menu to display the New Task
start menu. Press
m
again to return to the Switch
Task menu.
◆ Exiting all running functions
1
In Multitask,
s e p e
"Yes"
Auto power ON/OFF
Turning power ON/OFF
automatically
The power can be automatically turned ON/OFF at the
specified time.
<Example> Turning power ON automatically
1
m e 8712
Turning power OFF automatically :
m e 8713 e
Authenticate
2
Set the required items
e p
Auto power ON : Set if you automatically turn the
power ON.
Time : Enter a time to turn the power ON.
Repeat : Set a repeating operation.
✔
INFORMATION
･
Even when Auto power OFF is "ON", when the specified
time arrives while FOMA terminal is in any mode except
stand-by, the power is not turned OFF. The power is turned
OFF after exiting the currently active function.
･
In addition to turning the FOMA terminal OFF, keep Auto
power ON set to "OFF" in areas where use of a mobile
phone is prohibited, such as in airplanes, medical facilities
or hospitals.
Countdown timer
Setting the timer with a simple
operation
MENU 76
On the stand-by display, you can enter and set the time
(minutes) to elapse before the timer sounds.
1
Enter a time (minutes)
e r
The countdown starts.
･
The time is entered between 1 and 60 minutes.
･
Even when the FOMA terminal is folded,
countdown is continued.
･
When
c
or
f
is pressed during the
countdown, a screen appears for confirming the
end.
❖
When the specified time has elapsed
The next screen appears on the display, the timer starts
sounding at a Alarm clock sound set in Adjust volume,
and the sub-display section and light blink. Also, the
vibrator operates according to Alarm clock of Vibrate
alert/effect.
･
Press
f
to stop the timer.
･
When no operation is carried out for approx. 1 minute
or any key except
f
and
y
is pressed, the timer
stops.
✔
INFORMATION
･
When the specified time arrives during a call, a warning
sound is emitted and a screen showing a stopped timer
appears.
･
If the specified time arrives in the cases below, the alarm
starts sounding after the operations or actions are
completed.
- While making/receiving/calling/disconnecting a call
- During transmission/reception of 64K data communications
- In data transfer mode
- Infrared remote control function in operation
Alarm clock
Ringing alarm clock at specified
time
･
Up to 9 alarm clocks can be set.
1
m e 73 e 1
-
9
Setting/canceling the timed theme : Place the
cursor on the title and
m
･
appears at the left of the time for the set alarm
clock.
2
Set the required items.
Time : Enter the time to sound an alarm clock.
Repeat : Set a repeating operation.
･
When "Day of week" is selected, select "Day/
Week", select a day of week and press
p
.
Title : Set the title of the alarm clock.
･
Up to 7 two-byte (14 one-byte) characters can
be entered.
Snooze : Set whether to repeat Snooze operation
(sounding continues approx. 1 minute and stops 4
minutes) for approx. 30 minutes.