Docomo F-05A, Instruction Manual, Page: 105 / 405

103
Security Settings
Power OFF notice
Sending location information
when power is turned OFF
Make settings so that power is turned ON at the specified
notify intervals for Location request while the power is
OFF.
･
Set Request permit/deny to "Always permit" in advance
( → P217). Also set your terminal as an imadoco-search
target. For imadoco-search, see DOCOMO website etc.
･
Location information cannot be sent during full power
OFF ( → P42).
1
m e 9 e
Authenticate
e
On 2nd page,
1 e
Set the required items
e p
Notify : Notify a Location request with "ON".
Notify interval : Set the interval to perform Location
request.
･
Setting is unavailable with Request permit/deny
set to "Always deny". Set to "Always permit", and
then set Power OFF notice again.
◆
When Power OFF notice is set to ON
Location request is made immediately before power is
turned OFF. Power is temporarily turned ON at the
specified notify intervals while power is OFF, and
Location request is repeated.
Stopping Location request : On positioning screen,
p e
Authenticate
･
In Kids' mode, authentication is available also with the
password.
✔
INFORMATION
･
If power is turned OFF in the cases below, a Location
request is not made :
- When the PIN code is locked or PIN lock is in operation completely
- When UIM is not inserted
- When the battery is exhausted or low
･
Even Location request is interrupted, every when the set
time has elapsed, Location request is activated.
･
If power is turned OFF in the cases below, a Location
request is stopped :
- When Location request has been made during running of the Safety
alarm
- When Location request has been made for the Silent alarm function
･
This function is available in All lock, Lock on close, Personal
data lock or Self mode.
･
If PIN code ON/OFF is set to "ON" while power is OFF,
Location request by Power OFF notice is made after
entering PIN code.
Side key shortcut
Setting functions to activate by
pressing and holding down side
key
MENU 877
You can set functions to activate by pressing and holding
down
i
for 1 second or more with FOMA terminal
folded.
1
m e 9 e
Authenticate
e
On 2nd page,
2 e 1
-
5
Flashlight : Turns the light ON as a small light.
Safety light : Blinks the sub-display section and
light.
･
You can also set Check new message and Silent
mode ON/OFF.
･
If "No setting" is set, no function is activated.
✔
INFORMATION
･
Press
m877
to set without authentication
operation.
❖
When Flashlight is set
The light turns on for 30 seconds by holding down
i
for
1 second or more with FOMA terminal folded.
･
Opening FOMA terminal or pressing
i
turns the light
OFF.
･
Holding down
i
for 1 second or more while the light is
ON extends the lighting time approximately 30
seconds.
❖
When Safety light is set
The sub-display section and light blink by holding down
i
for 1 second or more with FOMA terminal folded.
Blinking is continued for 15 minutes. To stop halfway,
open FOMA terminal or press
i
.
･
Holding down
i
for 1 second or more while the light is
ON extends the operation time approximately 15
minutes.
✔
INFORMATION
･
If any of the function below is activated, Flashlight or Safety
light ends.
- Receiving call or mail/message
- Alarm clock, schedule reminder
- Silent alarm
- Safety alarm