Data communication
148
NFC is an abbreviation for Near Field Communication and a
short range wireless communication method of international
standard defined by ISO (International Organization for
Standardization). You can use a contactless IC card function,
Reader/Writer function, P2P function, etc.
You can send/receive data to/from another NFC compatible
device using NFC function.
◆
Android
™
Beam
Transfer data between the terminal and the Android Beam
function equipped terminal.
・
To use Android Beam, set the Android Beam function to ON
beforehand.
・
Android Beam cannot be used on some applications.
Available data varies by applications.
・
Data transfer is not guaranteed for all Android Beam
equipped terminals.
1
From the Home screen,
→
[Settings]
→
[Useful
tools]
2
Set [NFC] to ON
3
[Android Beam]
→
Tap the button at the upper
right of the screen to turn [Android Beam] ON
❖
Transferring content displayed on the
screen
You can transfer content shown on the screen such as
websites, only by holding
mark over each other's terminal.
1
Activate each other's Android Beam function
2
Show website, content, etc. to transfer on the
senders terminal
3
Hold
mark over each other's terminal
・
When the terminal detects a compatible device,
notification sounds. The screen content on the sender's
terminal is zoomed out and "Touch to beam" appears.
・
When the operation is being performed by the sender
using the shared menu, hold
marks over each other
to start transferring automatically.
4
Tap the screen content to transfer
The content shown on the sender's terminal is transferred
to the receiver's terminal.
◆
Tap & pay
Enable or disable the setting of the service available by holding
the terminal over the IC card reader.
・
For details on Tap & pay, on the Tap & pay screen, [MENU]
→
[How it works].
1
From the Home screen,
→
[Settings]
→
[Useful
tools]
2
[Tap & pay]
Tap & pay screen appears.
NFC communication