Settings
120
･
When docomo nano UIM card is locked by PIN or PUK,
remove the docomo nano UIM card. The Home screen will
appear and you can perform communication using Wi-Fi
function.
❖
PUK code
The PUK code is an 8-digit number for canceling the locked PIN
code. The PUK code cannot be changed by yourself.
･
If you enter a wrong PUK code 10 times consecutively, the
docomo nano UIM card is locked. Please contact a docomo
Shop.
･
When docomo nano UIM card is locked by PIN or PUK,
remove the docomo nano UIM card. The Home screen will
appear and you can perform communication using Wi-Fi
function.
❖
microSD password
You can set a password to a microSD card. If you use the
microSD card with password set by inserting to another
phone, password authentication on the phone is required. If
you insert it to a PC or phone without password setting
function, use of data or formatting cannot be made.
･
Some microSD cards may not support this function.
◆
Setting Security unlock preference
Set type of authentication operation to cancel the screen lock.
1
From the Home screen,
→
[Settings]
→
[Lock
& Security]
→
[Security unlock preference]
2
Authenticate
･
To set for the first time, authentication is not required.
3
Selecting an item
None :
Set not to display the lock screen.
Iris authentication :
Setting steps
→
Pattern :
Set to unlock by a pattern connecting at least 4
points.
Security code :
Set to unlock by a security code (4- to 16-
digit number).
Password :
Set to unlock by a password (which consists of
4 to 16 alphanumerics/symbols).
･
When a setting screen for protection of the terminal
startup appears, follow the onscreen instructions.
■
When the "Device lock settings" screen appears
after setting
You need to enable a security unlock preference. Tap [YES]
→
[Security authentication screen] or tap [NO] and enable the
unlock method in [Device lock]. (
✔
INFORMATION
･
While you use authentication storage, pattern, security code,
password, and iris authentication are available for the
security unlock preference.
