Settings
72
■
Using static IP address
You can set to connect to a Wi-Fi network using a static IP
address.
1
From the Home screen,
m
→
[Settings]
→
[Wireless & networks]
→
[Wi-Fi settings]
2
m
→
[Advanced]
3
Mark [Use static IP]
4
Select [IP address] and the other items
→
Enter necessary information
･
Enter [IP address], [Gateway], [Netmask] and [DNS
1] to enable a static IP address.
◆
Tethering
Tethering is a function for using mobile devices such as
smartphones as modems to allow external devices
connected via USB or Wi-Fi to access the Internet.
･
When tethering is enabled, sp-mode functions other
than Internet connection and mail service are not
available.
･
When you connect to Internet using tethering, Wi-Fi
device applications such as web browser or game may
not work properly depending on the condition of use.
✔
INFORMATION
･
To see information about tethering, from the Home
screen,
m
→
[Settings]
→
[Wireless & networks]
→
[Tethering]
→
[Help].
◆
USB tethering
If you connect the terminal with the included USB Cable for
PC connection T01 to use as a modem, you can access the
Internet.
1
Connect the terminal and a PC with the USB
cable
2
From the Home screen,
m
→
[Settings]
→
[Wireless & networks]
→
[Tethering]
3
Mark [USB tethering]
4
Check the precautions and [OK]
✔
INFORMATION
･
The system requirements of a PC for USB tethering are as
follows. Operations on upgraded OS or added/modified
environment are not guaranteed.
- Windows XP (Service Pack 3 or later), Windows Vista
and Windows 7
･
To perform USB tethering with Windows XP, install
dedicated driver to a PC. For download information of the
dedicated driver, refer to the following website.
http://www.fmworld.net/product/phone/usb/ (in
Japanese only)
･
To disable USB tethering on a Windows XP PC, remove
the USB cable from the PC without setting USB tethering
to OFF on the terminal.