Docomo F-03D, Instruction Manual, Page: 70 / 158

Settings
68
❖
Checking the access point in use
1
From the Home screen,
m
→ [Settings] →
[Wireless & networks]
→
[Mobile networks]
→ [Access Point Names]
･
When a confirmation screen appears, tap [OK].
❖
Adding new access point (New APN)
･
Do not change the MCC/MNC to other than 440/10. The
settings disappears from the screen.
1
From the Home screen,
m
→
[Settings]
→
[Wireless & networks] → [Mobile networks]
→ [Access Point Names]
･
When a confirmation screen appears, tap [OK].
2
m
→ [New APN]
3
[Name] → Enter a network profile → [OK]
4
[APN]
→
Enter the access point name
→
[OK]
5
Enter other items required by network
operator
→
m
→ [Save]
✔
INFORMATION
･
If you have changed MCC/MNC settings and they do not
appear on the APN name screen, reset to default or make
APN settings in [New APN].
❖
Initializing an access point
By initializing an access point, the default state is restored.
1
From the Home screen,
m
→ [Settings] →
[Wireless & networks]
→
[Mobile networks]
→ [Access Point Names]
･
When a confirmation screen appears, tap [OK].
2 m
→
[Reset to default]
✔
INFORMATION
･
You can select access point from the APNs list,
m
→ Tap
[Delete APN] to remove access points one by one.
❖
sp-mode
sp-mode is ISP for NTT DOCOMO smartphone. In addition
to accessing Internet, you can use the mail service using
the same address as i-mode mail (@docomo.ne.jp), etc.
･
sp-mode is a service requiring subscription. For details
on sp-mode, refer to NTT DOCOMO website.
❖
Setting mopera U
mopera U is ISP of NTT DOCOMO. If you have subscribed
to mopera U, you can use Internet after making the simple
settings.
･
mopera U is a service requiring subscription.
1
From the Home screen,
m
→ [Settings] →
[Wireless & networks]
→
[Mobile networks]
→ [Access Point Names]
･
When a confirmation screen appears, tap [OK].
2
Mark [mopera U （スマートフォン定額）
(mopera U (Smartphone flat-rate))]/
[mopera U 設定 (mopera U settings)]