Docomo F-03D, Instruction Manual, Page: 46 / 158

Before using the terminal
44
❖
Disabling the PIN lock
1
When the PIN code is locked, [Emergency
call]
2
Enter "**05* [PUK] * [new PIN code] * [new
PIN code] #"
･
For example, to change the PIN code to "7777" when
the PUK is 88888888, enter
"**05*88888888*7777*7777#".
◆ Security lock
If the security lock is set, authentication is required to
unlock the screen, which prevents others from misusing
the terminal.
You can also use authentication operation set in the
security unlock setting when using Password manager.
❖
Setting screen lock authentication
Set to authenticate on the screen when returning from the
sleep mode.
･
To validate authentication setting for the screen lock, set
security unlock method in advance.
1
From the Home screen,
m
→ [Settings] →
[Security]
→
Mark [Screen-lock auth]
→
Authenticate
❖
Setting security unlock method
Set unlock the screen lock or type of authentication
operation for Password manager.
1
From the Home screen,
m
→ [Settings] →
[Security]
→
[Security unlock preference]
2
Authenticate
･
To set for the first time, authentication is not
required.
3
Select an unlock method
Entering pattern to unlock : [Pattern] → Slide like
jointing at least four points vertically, horizontally
and diagonally to enter a pattern
→
[Continue]
→
Enter the same pattern → [Confirm]
･
When you set for the first time, "Securing your
phone"and "Example pattern" appear.
Entering security code to unlock : [Security code]
→
Enter the 4- to 16-digit security code → [Continue] →
Reenter the security code → [OK]
Entering password to unlock : [Password] → Enter the
4- to 16-digit password including alphabets
→
[Continue] → Reenter the password → [OK]
✔
INFORMATION
･
If you do not want to display the pattern when unlocking
the screen, from the home screen,
m
→ [Settings] →
[Security] → Tap [Use visible pattern] to unmark.
･
To enable vibration when entering the pattern, security
code, password, from the home screen,
m
→ [Settings]
→ [Security] → Tap [Use tactile feedback] to mark.
❖
Manual screen lock
1
X
The terminal goes into sleep mode and the screen lock
is activated.
❖
Unlocking the screen
1
During sleep mode,
X
or
B
2
Perform unlocking operation according to
the unlock method
For [Pattern] : Enter the pattern
For [Security code] : Tap at the bottom of the lock
screen → Enter the security code → [OK]
For [Password] : Tap at the bottom of the lock
screen
→
Enter the password
→
[OK]