Before using the terminal
31
･
Using electronic devices around the wireless charger
may cause failure of charging. Use electronic devices 30
cm or more away from the wireless charger.
･
If you charge the terminal with a commercially available
marked device, you may not receive incoming calls
while charging.
◆
Charging with AC adapter
Charge the terminal with FOMA AC Adapter 01/02
(optional) and the FOMA charging microUSB adapter T01
(optional).
a
Insert the AC adapter connector to the external
connection jack of the charging microUSB adapter
b
Open the jack cap (
a
) of the terminal, insert the
microUSB plug of the charging microUSB adapter into
the jack (
b
)
c
Insert the AC adapter power plug into an outlet
･
Key light turns on in red while charging, and turns off
when charging is complete.
d
Remove the AC adapter power plug from the wall
outlet when charging is complete.
e
Remove the microUSB plug from the terminal, and
close the jack cap
f
Remove the AC adapter connector from the charging
microUSB adapter
･
Pull it straight while pressing the release button of
the connector.
✔
INFORMATION
･
FOMA charging microUSB adapter T01 is an adapter for
connecting the terminal with the AC adapter. If you
connect the terminal with a PC using the FOMA USB
Cable etc., you cannot send/receive data or charge the
terminal. For connection to a PC, use the included USB
Cable for PC connection T01.
◆
Charging with FOMA USB Cable for
PC connection
If you connect the terminal with a PC using the included
USB Cable for PC connection T01, you can charge the
terminal.
･
When "
新しいハードウェアの検索ウィザードの開始
(New
hardware detection wizard)" appears on the PC, select "
キャンセル
(Cancel)".
To AC 100V
outlet
FOMA charging
microUSB
adapter T01
microUSB
plug
Connector
Release buttons
External connection jack
Jack cap
External connection jack
Power plug
AC adapter
Notification LED