
Before using the terminal
30
d
Remove the AC adapter power plug from the wall
outlet when charging is complete.
■
Charging information
You can check the charging state by the charge
information. Descriptions of charge information are as
follows:
Turning on :
Charging
Turning on
→
off :
Charging is complete
Flashing (at approx. 1 sec. interval)
*
:
Recognizing the
terminal/battery pack
Flashing rapidly (approx. 0.25 sec. interval) :
Problem
occurs in charging or malfunction.
Flashing slowly (turn on for approx. 2 sec.
→
turn off for
approx. 1 sec.) :
Waiting for the temperature to be
moderate
・
If the terminal/battery pack is not recognized, the charge
information does not turn on or off.
*
If the charge information flashes at interval of shorter than 1
second or turns off before the charging is complete, the terminal
is not recognized. Remove the terminal from the charging area to
replace at the center of the area.
✔
INFORMATION
・
Charge the battery putting the wireless charger on the
stable and flat place.
・
Always remove the AC adapter from the outlet when not
using the adapter for an extended period.
・
It is normal if the wireless charger may emit sound when
inserting the power plug into the outlet or putting or
removing the terminal/battery pack on or from the
wireless charger.
・
When charging the terminal, turn the vibrator off.
Vibration may move the terminal and the charging may
not finish or the terminal may fall.
・
Charging several terminals or battery packs at the same
time is not available.
・
If charging is not started, remove the terminal or battery
pack from the wireless charger. After approximately 2
seconds, press the Charging assisting button and put the
terminal or battery pack on the
mark. Note that if you
replace the terminal, by sliding, etc., instead of removing,
the Charging assisting button does not operate.
・
It is normal for the wireless charger to start charging
during recognition process.
・
The terminal with a carrying case may not be charged
depending on its material or thickness.
・
If the charge information of the wireless charger flashes
rapidly, it may be an abnormality of charging or
malfunction. Check if no foreign substance between the
wireless charger and terminal, then position the terminal
at the center of the charging area or remove and insert
the power plug from and into the outlet.
・
If the battery pack becomes hot, charging information
flashes slowly and stop automatically even if the
charging is not complete. Charging resumes
automatically when the battery pack is cooled down to
the right temperature for charging.
・
Place the wireless charger as far as possible from TVs or
radios because charging may cause noises on TVs or
radios.
mark
Connector
Dedicated AC adapter
Power plug
To AC 100V
outlet
Charging
information