Docomo DIGNO KY-41B, Instruction Manual, Page: 114 / 167

Data usage
Your data on mobile networks and Wi-Fi networks is
measured and displayed as a graph.
❶
In the standby screen,
z
▶ [Settings] ▶
[Wireless/Network] ▶ [Data usage]
XX MB mobile
data Display mobile data usage for the
time period set in [App data usage
cycle].
Mobile data Enable/disable Internet access
(packet communication) via the
mobile network.
Mobile data
usage Display mobile data usage for the
time period set in [Data warning &
limit] as a graph. Check mobile
data usage for individual apps.
Data warning
& limit Set the time period of displayed
data usage as well as an alert level
and upper level on mobile data
usage.
Wi-Fi data
usage Display Wi-Fi data usage for the
time period set in [App data usage
cycle] as a graph. Check Wi-Fi data
usage for individual apps.
Network
restrictions Make settings for network
restrictions.
NOTE
z
If data reaches the limit and you are no longer able to
use data, in the data usage screen, press [Data
warning & limit]
▶ Disable [Set data limit] or change
the upper limit in [Data limit] to resume using data.
Alternatively, if "Mobile data limit reached" is
displayed, select [Resume] to resume using data.
z
The value displayed for data usage is an
approximation recorded on mobile devices. You can
check on My docomo for the actual amount of data
on cellular networks.
Tethering
You can use the tethering function to connect Wi-Fi
devices as well as PCs, etc. connected via a USB cable
A to C 02 (sold separately) or Bluetooth to the Internet
by using the handset as an access point.
z
Connect up to 15 devices at the same time: one PC
connected via a USB cable A to C 02, ten Wi-Fi
devices, and five Bluetooth devices.
z
Before using Bluetooth tethering, register the other
Bluetooth device in advance (→P. 126). For settings on
the Bluetooth device, see the instructions for the
Bluetooth device.
112
Handset Settings