Docomo DIGNO KY-41B, Instruction Manual, Page: 111 / 167

z
Distance the handset and the Bluetooth device at
least 10 m apart.
z
If using the handset at less than 10 m, power off the
Bluetooth device.
❶
In the standby screen,
z
▶ [Settings] ▶
[Wireless/Network] ▶ [Wi-Fi]
❷
Checkmark [Wi-Fi] to enable it
❸
Select an access point
z
If you select a security-protected access point,
press
C
.
z
To register access points manually: [Add network]
▶ Enter the network name ▶ Set security ▶
C
NOTE
z
Depending on your environment, communication may
be slow or unavailable.
z
You can also use packet communication when Wi-Fi
is on. If a Wi-Fi network is disconnected, the handset
switches automatically to the mobile network. Note
that continuing to use the handset with the
connection switched may incur high packet
communication fees.
z
You can turn off the Wi-Fi function to reduce battery
consumption.
z
When using Wi-Fi, be sure to obtain an adequate
signal.
z
If you connect to an access point that is not
connected to the Internet,
or other icon appears,
and communication may be via the mobile network
and not the Wi-Fi network.
Detailed settings
❶
In the standby screen,
z
▶ [Settings] ▶
[Wireless/Network] ▶ [Wi-Fi]
❷
[Wi-Fi preferences]
Open network
notification Set the handset to display a
notification icon when an open
network is detected.
Install
certificates Install certificates.
Network rating
provider Set a network rating provider.
Wi-Fi Direct Wi-Fi Direct →P. 110
MAC address Check the MAC address.
IP address Check the IP address.
109
Handset Settings