111
File Management
Example: Still picture
1
In the home screen, [
R
]
/
[SH
tool]
/
[Recommendation]
/
[Contents manager]
2
Touch a still picture for a while
/
[Share]
/
[Bluetooth]
:
Set the receiver’s Bluetooth device to receive
data.
3
Select a Bluetooth device to
connect to
1
Send data from the sender’s
Bluetooth device
2
Drag the status bar down
/
select
data to receive
/
[Accept]
3
Drag the status bar down
/
select
the received data
Transmit 1Seg audio, music data, sounds from
Navigation and
౷ͺίς
(Map appli), etc. via
FM radio waves and receive and play the data
via FM radio, FM tuner mounted on a car, etc.
1
In the home screen, [
R
]
/
[Settings]
/
[FM transmitter]
2
Slide [OFF] to the right
3
Select an item
Frequency setting
: Set the frequency of the
FM radio waves.
Auto OFF setting
: Set when to automatically
disable the FM transmitter when 1Seg audio,
music, etc. is not played.
4
Set the frequency on the receiver
5
Play music etc.
Sending and receiving by
Bluetooth
Sending data
Receiving data
Note that if you select [Delete all before
registration] at receiving all data, all data
registered to the target function are deleted.
Some data cannot be received all.
When available space in the save destination
becomes insufficient, the data being received to
that point are saved and receiving ends.
FM transmitter
FM transmitter is not available when the
handset is in the following cases. If the handset
enters into one of the following cases when the
FM transmitter is enabled, the FM transmitter
will be disabled automatically.
During Airplane mode
During Bluetooth connection
During international roaming
When the handset has been out of the
service area since you turned the power on
Receivers may not emit sounds in the following
cases even when the FM transmitter is
enabled.
During charging
During USB connection
During earphone connection
During MHL
™
connection