106
File Management
You can send and receive data with other
handsets equipped with iC communication
function.
Make initial setting of Osaifu-Keitai in advance
(
n
P. 121).
In the following cases, you cannot perform iC
communication.
During Airplane mode
During Osaifu-Keitai lock
In the following cases, data may not be sent via
iC communication.
During a call
During charging
During earphone/microphone connection
During USB connection
During MHL
™
connection
sp-mode mails, business cards, memos,
schedules and ToruCa cannot be sent by iC
communication. For details on other data that
can be sent and received, refer to “Infrared
communication” (
n
P. 105).
Use while placing the
a
mark of receiver’s
handset on that of sender’s handset as shown.
Do not move the handset until sending and
receiving of data is completed.
There may be some cases in which data are
poorly sent and received or the screen is off by
positioning the handset near depending on the
other party’s handset. In that case, put a distance
between the
a
marks apart/closer or move
them up/down or to the left/right.
To enter authentication code is required for
sending and receiving all data items. The
authentication code is a password exclusive to
iC communication. Before starting data
communication, the sender and receiver must
enter the same user-specified four-digit code. In
addition, to enter passcode may be required for
sending all data items.
Receiving all data is not available depending on
the data type.
When available space in the save destination
becomes insufficient, the data being received to
that point are saved and receiving ends.
iC communication
Using iC communication
When using iC communication
Sending and receiving by iC
mark
Use while placing the
a
mark of rece
When using iC communication
g