39
Before Using the Handset
When the handset is turned on, you can charge
the handset by connecting the handset to a PC
with Micro USB Cable 01 (sold separately).
Install the USB driver to the PC in advance. If the
USB driver has not been installed on the PC, you
cannot charge the battery by connecting the
handset to the PC via Fast transfer mode.
Ʀ
For details on installing USB driver, refer to
“Manual for USB Driver Installation” in PDF
format in the following site.
(
http://k-tai.sharp.co.jp/support/d/sh-09d/ (in
Japanese only)
For details on connecting to a PC
n
P. 112
1
H
(for at least 2 seconds)
:
When you turn the power on for the first time,
the initial setting screen is displayed. Each
setting item can also be set from menus
(
n
P. 43).
:
If the initial setting screen for docomo service
is displayed, operate by following the
instructions on the screen.
1
H
(for at least 1 second)
/
[Power
off]
/
[OK]
The screen is off and the sleep mode is activated
when
H
is pressed or the handset is not in use for a
set length of time.
Press
H
in the sleep mode to deactivate the sleep
mode.
When the power is turned on or the sleep mode is
deactivated, the touch panel is locked.
Touch [
J
] to unlock.
Operations in touch panel unlock screen
To set/disable the manner mode:
y
(for at least
1 second)
To turn on the mobile light:
x
(for at least 1
second)
Ʀ
Press any of the keys or touch [
J
] to turn it off.
To activate the camera: [
K
]
Charging with Micro USB Cable
01
Turning power ON/OFF
Turning power ON
Turning power OFF
Sleep mode
Touch panel lock
The mobile light will automatically turn off
approximately 30 seconds after it turns on.
The status panel is displayed when Screen lock
is set to [Slide or Touch].