Docking Drawer Duo™ and
Style Drawer Trio™ Installation
Instructions
Visit our Support Library at
support.dockingdrawer.com to find:
Detailed Mounting Diagrams to plan your installation,
DXF and STEP Files for importing into 2D and 3D layout
programs.
Tools Needed:
• Jigsaw
• Drill
• Measuring Tape
• Screwdriver
• Square
• Pencil
• Cutout Template
Time Required - 30 min
DOCKING DRAWER
DUO PART #:
0290-20610W-UK
0290-20610W-EUR
0290-20610W-AUS
STYLE DRAWER TRIO
PART #:
0290-20533W-AUS
STYLE DRAWER TRIO
PART #:
0290-20533W-EUR
STYLE DRAWER TRIO
PART #:
0290-20533W-UK
DOCKING DRAWER
DUO PART #:
0290-20610W-UK
0290-20610W-EUR
0290-20610W-AUS
FOR ACCURACY SCALE PRINTER TO 100%
CUT
OUT
TEMPLA
TE
for
Docking
Dr
aw
er
Duo
How to Install the Outlet
Step 1 -
Verify the drawer dimensions.
Docking Drawer Duo and Trio outlets require at
least 51mm behind the drawer box and at least
a 381mm wide drawer box.
DOCKING DRAWER DUO
STYLE DRAWER TRIO
Step 2 -
Remove the cutout template and
flip to the side that corresponds with your
product’s part number.
Step 4 -
With a 1/2” drill bit, drill a hole in
each corner, being careful not to splinter the
wood on the inside of the drawer box. Using
one of the 1/2” holes, insert a jigsaw and then
make the required cutouts in the drawer box.
Step 3 -
Locate the proper location for
the receptacle box cutout using our cutout
template. You can locate the proper location
from either the inside or backside of the
drawer box, making sure that the arms will
not interfere with the slides and that there is
enough material surrounding the receptacle
box to securely hold it in place.
•
Failure to follow these instructions can cause
death or permanent injury. Do not work on
live electrical circuits! Make absolutely certain
power is off before connecting the device!
• This product is for dry, indoor and permanent
installations only.
• Install the device in accordance with all
national and local electrical codes.
CAUTION – READ CAREFULLY
Step 5 -
Reinstall the drawer box and slide
the Docking Drawer Duo or Trio receptacle
box through the cutout. Secure it with the 4
wood screws provided.
Step 3 - cont.
