46
DNP Imagingcomm America Corporation
Repacking the Printer
IDW500 User Guide
Repacking the Printer
To transport the printer, repackage the printer with the original packaging material. Failure to do so will void any warranty. If
the original packaging materials are not used or the printer is not packed correctly, the printer may be broken during
transport. Always save the print head protective foam. Do not throw away any packaging as it is needed to safely transport
the printer.
Remove all accessories, media, and attachments from the printer – this includes all the ribbon, paper roll, and paper spools
as well as the USB and power cables. Place the accessories in the accessory box.
Tape Strips
*When transporting,
secure the front cover
with tape to prevent
opening. (Width 50
mm, length 200 mm
or more.)
Wrap the printer
in the plastic.
Accessories Box:
Place all
attachments in the
accessories box.
The accessories
box is required for
proper packaging
during shipment.
Match the printer
orientation with
the arrows.
The print head
protective foam is
required for
transport.
Place the
foam so that it is flat
against the print path.
