24
Replacing the Paper Roll and Ink Ribbon
Chap
te
r 2
Pr
epa
ra
tio
n
s
Replacing the Paper Roll
and Ink Ribbon
If the paper roll or ink ribbon runs out while printing, the
following error message appears. Proceed as follows to
replace the paper roll and ink ribbon.
Unlocking the Ribbon Door
1
Touch the top left corner of the error message screen
twice in succession.
The password entry screen appears.
2
Enter the administrator password using the numeric
keypad, and touch [OK].
(The factory default setting for the password is
“9999.”)
The ribbon door unlocks, and the error message screen
returns. The key icon at the top left changes to “!,”
indicating that the door is unlocked.
Removing the Paper Roll and Ink
Ribbon
The ink ribbon and paper roll are not meant to be used
up completely. Even if there is some ink ribbon and
paper remaining, be sure to load a new ink ribbon and
paper roll as a set. Using leftover paper may result in
malfunction.
1
Remove the output cover and output tray.
Note
