22
Loading the Paper Roll and Ink Ribbon
Chap
te
r 2
Pr
epa
ra
tio
n
s
Attaching the output tray adapter
The output tray adapter prevents printouts from sticking
out of the output tray.
Use the adapter when printouts curl as shown.
About 40 printout sheets can be stored in the output tray in
most cases. However, this number can vary greatly
depending on the amount of curling in printouts. In
general, you should remove ejected printouts as soon as
possible.
Adjusting the output stopper position
Adjust the position of the output stopper according to the
printout size and amount of curling. There are three
positions to which to adjust.
If the output stoppers are not positioned correctly, paper
jams may occur.
To attach the output stopper
To remove the output stopper
To remove the output tray
Hold the output tray on both sides, and
(1)
raise the tray
while
(2)
pulling it toward you.
Note
Note
(1)
(2)
