22
Trouble-shooting
c.
If the printer is stopped in the middle of cutting:
1.
Turn the power back ON.
Jammed paper is cleared, and the cutter blade returned to its ready position.
2.
Remove any partially printed material from inside the printer.
Then follow the methods as for setting the media (P.13).
d.
If power is cut during printing:
* If the power is cut during printing, you will not be able to open the front cover.
1.
Turn the power back ON. The partial print will be cut into scrap-size pieces and removed.
After this, you will be able to open the front cover.
2.
Check that there is no printed material in the printer.
If the paper is jammed, refer to a. If the paper is jammed. (P.18)
CAUTION
If the jammed paper cannot be freed, please contact a service representative.
・
Do not turn the power OFF while printing. This could damage the printer.
Summary of Contents for DP-ID600
Page 1: ......
Page 4: ...3 For kundene i Norge Dette utstyret kan kobles til et IT str mfordelingssystem...
Page 28: ...2 5...