DNP DP-ID600, User Manual, Page: 17 / 28

16
Setting Up the Printer
7. Set the take-up side core of the ribbon to the printer. Insert the protrusion of the core left side in the hole on
the printer, then set the right side to the holder of the same color (yellow).
8. Set the supply side of the ribbon to the printer carefully to take out any slack. Insert the protrusion of the core
left side in the hole on the printer, then set the right side to the holder of the same color (white). Take up the
ribbon slack by rotating the ribbon on the supply side.
Ribbon winding direction
9. Close the front cover.
When the front cover is closed, the paper initialization process will be carried out (5 blank sheets will be fed
out).
(1)
(2)
(4)
(3)