23.
EXAMPLES: GPO MOMENTARY RADIO GROUP
To setup a GPO Momentary Radio Group the use of MEMs is required.
First, in the GPO actions page set the operating mode of each GPO you will be using to “momentary”
and set the desired momentary on-time.
Next, in the MEM Configuration page assign a MEM to each GPO that you will be using for your Radio
Group. Under the Radio Group Dropdown, assign all MEM’s to the same radio group (RG1 – RG5)
A source event (GPI, Keypress or Serial Event) ON action will turn ON the MEM/s and GPO’s associated
with the Radio Group. MEM ON must be selected as the ON action for the Radio Group functionality to work
properly.
(Continued on Next Page)
USP3 User Manual
Page 38 of 46
