22.
EXAMPLES: MEM / RADIO GROUP TALLY
To setup a MEM based RADIO GROUP TALLY the use of MEMs is required.
First a MEM/s will need to be assigned to a Radio Group (RG1 – RG6)
A source events (GPI, Keypress or Serial Event) ON action will turn ON the MEM/s associated with the
Radio Group. MEM ON must be selected as the ON action for the Radio Group functionality to work
properly.
Assign each MEM to a specific USP3 Key in the Tally Assignment page
.
When a Source Event triggers on the USP3, the MEM tied to this source event will turn ON. This MEM
ON action will cause its Key tally to turn ON all other Key tallies in the same Radio Group will turn
OFF.
USP3 User Manual
Page 37 of 46
