12. AHSC TRANSMIT ACTION
Action Label Enter any 32 characters. This label is used in the Event Action Table.
ASCII/ HEX
Command
The ASCII/HEX Command is 1 - 256 characters in length.
Use %yz to enter a HEX value. ‘y’ and ‘z’ are values 0 - 9 or A-
F. Two characters must follow %.
Use %WTttt to add a WAIT time, 001 - 999 milliseconds. Three numbers must follow %WT.
The characters preceding %WT are sent immediately. The characters after %WTttt are sent
after the wait time expires. More than one %WT can be included in a command. NOTE-
%WT is only an approximate wait time.
For SERIAL only- Use %BR to add a BREAK character as the first transmitted character.
NOTE- Spaces between characters are NOT transmitted. Use %20 to transmit a
space character.
USP3 User Manual
Page 18 of 46
