DMT LS-190 Page 66 Manual Download

Page: 66 / 76

Ordercode: 101600

LS-190 LED Screen Processor

How to Use Blackout

Press the BLACK/0 button to perform a blackout.

How to Save Parameters

01)

Press the SAVE/PIP1 button to enable the SAVE function.

02)

Turn the menu control (02) to select one of the 10 save positions (SAVE1-10).

03)

Press the menu control (02) to save.

04)

It is also possible to press the MENU/EFFECT button to enter the menu. Turn the menu control (02) to

select <SAVE SETUP> and press the menu control (02) to select “SAVE TO,” in order to save the

parameter.

How to Load the Saved Parameters

01)

Press the LOAD/PIP2 button to enable LOAD function.

02)

Turn the menu control (02) to select the save slot which you would like to load.

03)

Press the menu control (02) to confirm.

04)

It is also possible to press the MENU/EFFECT button to enter the menu. Turn the menu control (02) to

select <SAVE SETUP> and press the menu control (02) to select “LOAD FROM,” in order to load the

saved parameter.

Summary of Contents for LS-190













































































Search results

Summary of Contents for LS-190

Reviews:

Related manuals for LS-190

Brands by name

Popular brands

DMT LS-190, Manual

Search results

Summary of Contents for LS-190

Reviews:

Related manuals for LS-190

Brands by name

Popular brands