DMT LS-190 Page 62 Manual Download

Page: 62 / 76

Ordercode: 101600

LS-190 LED Screen Processor

Connect Both Ports (D and U) of One Sending Card to a LED Display

01)

Make sure that the device is operating in normal mode: both red power indicators and both green

signal indicators are ON, when the device receives signal input.

02)

Choose the input signal, for example, DVI.

03)

Connect one end of the cable to the D1 port, and the other end one to the U1 port.

04)

Connect the U1 port of No.1 sending card to the LED display. It can be done by following the same

procedure as on page 59.

05)

Connect the D1 port of No.1 sending card to the LED display.

06)

Turn the menu control (02) to select NO.1 and press the menu control (02) to confirm.

07)

Turn the menu control (02) to select <SENDING CARD NO.> and press the menu control (02) to

confirm. Turn the menu control (02) to select NO.1 and press the menu control (02) to confirm.

08)

Turn the menu control (02) to select <QUICK CONNECTION> and press the menu control (02) to enter.

09)

Turn the menu control (02) to select <RECEIVING CARD SET> and press the menu control (02) to enter.

10)

Turn the menu control (02) to select <CHOOSE CABLE> and press the menu control (02) to enter. Turn

the menu control (02) to select <PORT D> and press the menu control (02) to confirm.

11)

Turn the menu control (02) to select <D PORT Offset (A/B) Y>. Press the menu control (02) to enter.

Turn the menu control (02) to set its value to 240.

12)

Turn the menu control (02) to select <DISPLAY CONNECTION> and press the menu control (02) to

enter. Press the menu control (02) again to confirm and then turn the menu control (02) to choose

the desired connection mode. 8 different kinds of connection are available:

Summary of Contents for LS-190













































































Search results

Summary of Contents for LS-190

Reviews:

Related manuals for LS-190

Brands by name

Popular brands

DMT LS-190, Manual

Search results

Summary of Contents for LS-190

Reviews:

Related manuals for LS-190

Brands by name

Popular brands