DMT LS-190, Manual, Page: 55 / 76

54
Ordercode: 101600
LS-190 LED Screen Processor
How to Perform Customized Output Resolution
01) Press the MENU/EFFECT button to enter the menu.
02) Turn the menu control (02) and select [OUTPUT].
03) Press the menu control (02) to enter.
04) Turn the menu control (02), select <OUTPUT FORMAT> and press the menu control (02) to enter.
05) Turn the menu control (02) to select <CUSTOM> and press the menu control (02) to enter. The display
will show:
06) Press the menu control (02) to enter edit mode.
07) Turn the menu control (02) to adjust and press the menu control (02) to set: width, height and the
frequency (50 or 60Hz).
08) If you multiply all the resolution values (width, height, frequency), the result should not exceed
141557760.
Example
Resolution # 1: 1536x1536x60=141557760 (OK)
Resolution # 2: 2560x1536x60=235929600 (INCORRECT/NOT SUPPORTED)
How to Perform Single Image Switching
01) Boot the default CV1 to the current input source. If you need to seamlessly switch to other sources,
such as DVI, press the DVI button. The display will show:
02) The CV1 button’s light turns off after pushing the DVI button. (The DVI button ON = input is ok. The DVI
button is flashing = input is not present or not supported.)
03) Use the same method to switch the signals between CV2, CV3, S-Video, YPbPr, VGA, SDI and DP.
Note: When it comes to CV1, CV2 and CV3, only cut switching is supported.