DMT D1 Videomixer Manual Download Page 14

Page: 14 / 36

Ordercode: 101281

D1 Videomixer

Main Menu Options

The display is equipped with a touch screen, which means that the options can be accessed in 2 ways:
●

By turning (to select/adjust the values) and pressing the menu control (to open/confirm).

●

By touching the options directly on the screen.

Therefore, the instructions included in this user manual will contain words as: select, adjust, open and
confirm.

Please note, that some options can be accessed ONLY by turning/pressing the control and the touch
screen will not work.

01)

At start-up, the display will show 2 screens:

02)

Press the MENU button (06) or turn the menu control (05) to enter the main menu. The display will
show:

03)

Turn the menu control (05) to toggle through the submenus (or touch the white arrows located on
the opposite sides of the touch screen).

04)

Press the menu control (05) to open the selected submenu (or touch its icon on the touch screen).

05)

See page 14 for the available submenus.

Summary of Contents for D1 Videomixer





































Search results

Summary of Contents for D1 Videomixer

Reviews:

Related manuals for D1 Videomixer

Brands by name

Popular brands

DMT D1 Videomixer, Manual

Search results

Summary of Contents for D1 Videomixer

Reviews:

Related manuals for D1 Videomixer

Brands by name

Popular brands