manualshive.com logo in svg

DMP Electronics Aqualite 7060A, Installation And Programming Manual

Share
Download
DMP Electronics Aqualite 7060A Installation And Programming Manual Download Page 19

7000 Series Installation and Programming Guide   |   Digital Monitoring Products  

 

 

 

 

   17

END USER TRAINING

This section covers 7063/A, 7073/A, 7163, and 7173 keypads and contains three sections:

 

▶

Keypad Arming and Disarming

 

▶

Keypad Access Control

 

▶

Keypad Entry Delay

All of the examples displayed assume that 

CLOSING

 

CODE

 is 

YES

 in panel programming.

Figures 9 through 12 show the user presenting a card to the keypad. When an external reader is connected to a 
7073/A and a 7173 keypad, the user presents a card to the reader rather than to the keypad.

Keypad Arming and Disarming

Area System Type

1.  Press 

CMD

 until the keypad displays 

ARM

 

DISARM

.

2.  Press the select key under the preferred option.

3.  The keypad displays 

ENTER

 

CODE: -

. The user presents their card to the reader.

Once validated by the system, all areas assigned to that code arm or disarm automatically and the 7073/A and 7173 
keypad door strike relay activates. See Figure 9.

    

  ABC SECURITY

ARM                DISARM

    

 ABC SECURITY

ENTER CODE: 

–

    

 ABC SECURITY

ALL?            NO    YES

Select NO to arm or disarm individual areas.  

Select YES, or simply wait, to automatically arm or disarm all areas for which you are authorized.

Figure 9: Area Arming and Disarming

All/Perimeter System Type

Present the card to the reader or press 

CMD

, the keypad displays 

DISARM?

 or

 PERIM  ALL

 (when arming). Press 

the select key under the desired option. The keypad displays 

ENTER CODE: -

. Present the card to the reader. Once 

validated by the system, the selected areas arm or disarm automatically. On 7073/A and 7173 keypads, the Door Strike 
relay then activates.

Summary of Contents for Aqualite 7060A

























Reviews:

No comments

Brands by name

Popular brands

Load more brands