DMP Electronics 9800INT Series Installation And Programming Manual Download Page 30

Page: 30 / 52

9862INT Series Installation and Programming Guide

System Type

Program the keypad as the same system type selected in
panel programming.

Dealer Logo

Use this option to add a custom dealer logo to the main
screen of the keypad. Prior to selecting

ADD

, insert a

microSD card containing the logo file in to the slot on the
right side of the keypad. Refer to Figure 13. Select

ADD

upload the file to the keypad.

Adding Logo Sure?

The keypad will display

ADDING LOGO

SURE?

. Select

YES

to proceed. While the logo is being

uploaded, the keypad displays

ADDING LOGO

ADDING

LOGO COMPLETED

displays to confirm a successful upload.

Dealer Info

Select

ADD

at the

DEALER INFO

prompt to include

information about the dealer when the logo is pressed.
The keypad displays

ADDING INFO SURE?

to confirm the

selection. Press

YES

to proceed.

Adding Info Sure?

While the info is being uploaded to the

keypad, the keypad displays

ADDING INFO

COMPLETED

displays to confirm a successful upload. Press

and release the microSD card to eject.

SYSTEM OPTIONS
AREA A/P H A/A HSA

DEALER LOGO
ADD DELETE

ADDING LOGO
SURE? NO YES

DEALER INFO
ADD DELETE

ADDING INFO
SURE? NO YES

Summary of Contents for 9800INT Series





















































Search results

Summary of Contents for 9800INT Series

Reviews:

Related manuals for 9800INT Series

Brands by name

Popular brands

DMP Electronics 9800INT Series, Installation And Programming Manual

Search results

Summary of Contents for 9800INT Series

Reviews:

Related manuals for 9800INT Series

Brands by name

Popular brands