9862INT Series Installation and Programming Guide
18
Arming/Disarming Wait Time
Select the number of seconds (1-9) the keypad should wait
to arm and disarm when an area system displays
ALL? NO YES
or a H/S/A system waits during arming only. If
NO
or
YES
, or
HOME
,
SLEEP
, or
AWAY
is not manually
selected before the delay expires, the keypad automatically
selects
YES
or
AWAY
. Select zero (
0
) to disable this feature.
The delay also occurs when a credential is presented for
arming the H/S/A system. Default is
2
.
For non-Area systems with keypads that have firmware
version 205 or higher, presenting a credential to the keypad
automatically initiates the arming sequence after the arming
wait time expires. All/Perimeter systems arm
All
. Home/
Sleep/Away and Home/Away systems arm
Away
.
Enable Tamper
If the keypad is mounted on a wall, select
YES
to enable the
wall tamper. Default is
NO
.
ALL?:
NO YES
DELAY:
2
ENABLE TAMPER?
NO
YES
