Digital Monitoring Products, Inc. | 9800 Series Installation and Programming Guide
11
Connect the Keypad
Connect the keypad to the panel by using one of the following options: Wireless
Keypad Association, Auto Pairing, or manually at the keypad in Device Setup. A
maximum of seven keypads can be paired with each panel.
Wireless Keypad Association
XTLplus/XTLtouch
1.
Press
Options
in the carousel menu.
2. Press the installer options icon at the bottom-right corner of the screen.
3. Enter
3577
(INST) and press
CMD
.
4. Press
KPD
RF
to start the RF survey communication. The keypad displays its
wireless serial number and
RF
SURVEY
. When successful communication has
been established, the AC Power/Armed LED turns blue. If communication has
not been established, the LED turns red.
XT30/XT50 or XR150/XR550 Series Panels
Reset the panel three times. The yellow LED at the top of the panel will begin flashing
between each press. Wait for sixty seconds. When communication is confirmed, the
LED will turn green and will stay on steady.
3
