DMP Electronics 7800 Series Installation And Programming Manual Download

Page: 34 / 60

7800 Series Installation and Programming Guide | Digital Monitoring Products, Inc.

System Type

Program the keypad as the same system type selected in panel

programming.

Dealer Logo

Use this option to add a custom dealer logo to the main screen

of the keypad. Prior to selecting

ADD

, insert a microSD card

containing the logo file in to the slot on the right side of the

keypad. Refer to Figure 13. Select

ADD

to upload the file to the

keypad.

Adding Logo Sure?

The keypad will display

ADDING LOGO

SURE?

. Select

YES

to proceed. While the logo is being

uploaded, the keypad displays

ADDING LOGO

COMPLETED

displays to confirm a successful upload.

Dealer Info

Select

ADD

at the

DEALER INFO

prompt to include

information about the dealer when the logo is pressed.

The keypad displays

ADDING INFO SURE?

to confirm the

selection. Press

YES

to proceed.

Adding Info Sure?

While the info is being uploaded to the

keypad, the keypad displays

ADDING INFO

COMPLETED

displays to confirm a successful upload. Press

and release the microSD card to eject.

SYSTEM OPTIONS
AREA A/P H A/A HSA

DEALER LOGO
ADD DELETE

ADDING LOGO
SURE? NO YES

DEALER INFO
ADD DELETE

ADDING INFO
SURE? NO YES

Summary of Contents for 7800 Series





























































Search results

Summary of Contents for 7800 Series

Reviews:

Related manuals for 7800 Series

Brands by name

Popular brands

DMP Electronics 7800 Series, Installation And Programming Manual

Search results

Summary of Contents for 7800 Series

Reviews:

Related manuals for 7800 Series

Brands by name

Popular brands