36
734N Series Installation and Programming Guide | Digital Monitoring Products, Inc.
Card Format Number
Notice: If you see CARD OPTIONS, refer to LT‑0737C.
Enter the slot number (1‑8) that you want to program
for a custom non‑DMP card format. The format that is
programmed into slot 1 is the default format. In the event that
a card with an unrecognized format is used, that card will be
read in the format that is programmed in slot 1. To restrict
card reads to specific formats, only program slots 2‑8.
See “Public Card Formats” for some publicly available card
formats that can be used with the 734N. Other private or
custom formats may also be compatible. Please contact the
credential supplier or manufacturer for the bit structure.
Note:
If you select slot 1 and you are upgrading from
XR panel version 182 or earlier,
FORMAT NAME
will
automatically be named
SINGLE CARD FORMAT
and
WIEGAND CODE LENGTH
will default to 45.
CARD FORMATS
FORMAT NO: ‑
Summary of Contents for 734N Series
Page 1: ...INSTALLATION AND PROGRAMMING GUIDE 734N Series Access Control Modules...
Page 2: ......
Page 59: ......
Page 60: ...LT 1197 20314 1 04 2020 Digital Monitoring Products Inc...
