DMP Electronics 734N Series, Installation And Programming Manual

Page: 30 / 60

26 734N Series Installation and Programming Guide | Digital Monitoring Products, Inc.
734N MENU
When you connect the keypad to the module, the version
number and release date display. To access the module
Programmer Menu, enter 6653 (PROG).
PROGRAMMER MENU
Press CMD to advance through programmer menu and
press a select key or area to enter the appropriate menu:
INITIALIZATION , COMMUNICATION , ACCESS OPTIONS , or
STOP .
734N
VER VVV MM/DD/YY
734N
PROGRAMMER
Reset Header
To reset the module when first installing the system, short the two pins on the reset
header before applying power to the module.
To reset the module while the system is operational, short the two pins on the reset
header for one or two seconds without powering down the system.