DMP Electronics 734B, Installation And Programming Manual

Page: 19 / 36

Digital Monitoring Products, Inc. | 734B Installation and Programming Guide 15
AX‑Bus Addresses Explained
XR550 panels are capable of access
control expansion using any of the five
AX/LX‑Bus headers (AX/LX500, 600,
700, 800, and 900). An AX‑Bus address
can accommodate one door output and
one expansion zone. Because the 734B
has a built‑in four‑zone expander, three
extra zones will be mapped to the 734B
automatically.
A 734B with an address of 1 on
AX500 would represent door 501 and
zones 501‑504. A 734B with an address of
2 on AX500 would represent door 505 and
zones 505‑508. A 734B with an address
of 1 on AX700 would represent door 701
and zones 701‑704.
Note: Hardwired zone expanders
and addressable points and
modules do not communicate on
an AX‑Bus. AX‑Bus doors do not
have programmable device or
communication types and do not
have assignable display areas.
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
Figure 11: AX‑Bus Addresses