WA22AE
,,,.
..... DANIELS
_,1/W'
MANUFACTURING
11r1
CORPORATION
PNEUMATIC CRIMP TOOL
DATASHEET
SEE PAGE 3 FOR IMPORTANT INFORMATION CONCERNING
LIMITED WARRANTY, AND LIMITATION OF LIABILITY.
GENERAL SPECIFICATIONS
* Pneumatic Tools are designed with up to 8
die closures, changeable by a selector knob.
* The tool also has a full cycle ratcheting
control mechanism.
* Either the hand operated valve or the air
foot valve may be used. The working
pressure of the tool is 80-120 p.s.i. It is
recommended that each tool be set up with
a Regulator and Filter (WA27RF).
* All Crimp Tools, Positioning Heads, Bench
Mounts, Gages and Foot Valves must be
ordered separately by part number.
CRIMP TOOL
HAND VALVE
GAGING INSTRUCTIONS
BM-2 BENCH MOUNT
(
OPTIONAL)
Length: 8" Width: 2.25" Weight: 2.21bs.
CRIMPING RANGE
See GAGING INSTRUCTIONS below.
ACCOMMODATIONS
Tool will accommodate all "K" series Positioners relating
to Daniels hand tool part numbers AFM8 and MH800.
FOOT VALVE OPERATION
Attach Foot Valve between air supply and tool air inlet.
Depress hand valve and lock in down position with
set screw (A) using 1 /16 hex Allen
°
wrench.
CAUTION!
WA10 FOOT VALVE
(
OPTIONAL)
CUSTOMER
SUPPLIED
\_ WA27RF
(
OPTIONAL)
AIR SUPPLY
DO NOT CRIMP GAGE!
A
G822
"GO" GAGING
Operate tool to fully closed position. Insert "GO"
gage end as shown. Gage must pass freely
between indenter tips.
SELECTOR
NO.
1
GREEN
2
3
4
INDENTER
5
6
7
8
B
A ±.0001
GO DIA
.0070
.0095
.0120
.0150
.0180
.0225
.0260
.0305
GAGE
GO
B
NO-GO
SELECTOR
PART NO.
A
DIA
DIA
NO.
G822
.0305
.0330
8
"NO-GO" GAGING
Operate tool to fully closed position. Insert "NO GO"
gage end as shown. The "NO GO" may partially enter
the indenter opening, but must not pass c ompletely
through the opening.
±.0001
B NO-GO DIA
.0090
.0115
RED
.0140
.0170
.0200
INDENTER
.0250
.0285
.0330
DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USA, PHONE 407 /855-6161, FAX 407 /855-6884
COPYRIGHT C) 2009 DANIELS MANUFACTURING CORP., USA. WWW.DMCTOOLS.COM E-MAIL: DMCOOMCTOOLS.COM ALL RIGHTS RESERVED.
3/09
REV. C
PAGE 1
WA22AE-DS