How to install and
operate the
X-D11
digital mono
amplifier
Welcome!
This owners manual is written in easy english and
uses a lot of drawings to simply the installation and
use of the above amplifier.
Your X-program amplifier must be installed correctly
in order to work well. This manual will show you how
to install the amplifier like a pro. Please read the
entire manual before beginning the installation.
Install the amplifier yourself if you feel confident with
our instructions and if you have the proper tools.
However if you feel unsure, turn over the installation
job to someone better suited to it.
Warranty Service
This amplifier is covered by warranty, depending on
the conditions in the country where it is sold. If the
amplifier is returned for service, please include the
original dated receipt with the product.
Technical Assistance
For technical assistance ask the shop where the
product was sold or the distributor in your very coun-
try.
You can always phone the DLS Helpdesk in Sweden
+ 46 31 84 00 60 or send an e-mail to [email protected].
Information can also be found on our WEB-site
www.dls.se
Contents
Specifications................................
1
Features……………………………..
2
Installation…………………….…….
2
Trouble-shooting……………………
2
Tools and materials needed……….
3
Amplifier installation kit…………....
3
Routing Wires……………………....
3
Wiring
Power and Outputs……………..….
4
Inputs and controls………………...
5
Input level control..........................
5
Crossovers…………......................
5
Phase control.....………………...…
5
Bass boost control.........................
6
Speaker wiring:
Single amplifier system………….….
6
Testing..........................................
6
Bridging two amplifiers...................
7
Professional tips……………………..
8
Specifications
X-PROGRAM
X-D11
Number of channels
1
Power output in 4 ohm (0,4% THD)
1 x 400 W
Max output in 2 ohm (0,7% THD)
1 x 750 W
Max output in 1 ohm (1% THD)
1 x 1050 W
All above output power ratings at 13,8 Volt
Signal to noise ratio, A-weighted
>100 dB
Damping factor
>100
Frequency response
15 Hz - 160 Hz
Input impedance, low level
10 kohm
Input impedance, high level
100 ohm
Input sensitivity
0,15 - 5V
Phase control 0-180 degrees variable yes
Remote bass boost control
yes
Bass boost adjustable gain @45 Hz
0 - +18 dB
Filter subsonic, 24 dB slope
15 - 50 Hz
Filter lowpass 24 dB slope
15 - 150 Hz
Bridge mode (master/slave selector)
Yes
Max size for power cables
21 mm
2
(4AWG)
Max size for speaker cables
10 mm
2
(7AWG)
Power consumption, idle
1,5 A
Maximum current draw
120 A
Built-in fan cooling
yes
Fuse
4 x 30A
Dimensions (mm)
50x430x250
Dimensions (inch)
2x16,93x9,84
Weight
5,3 kg (11,7 lb)
We follow a policy of continuous advancement in
development. For this reason all or part of specifications
& designs may be changed without prior notice.
DLS Svenska AB
P.O. Box 13029
S-40251 Göteborg, Sweden
Tel: +46 31 840060
Fax: +46 31 844021
E-mail: [email protected]
www.xprogram.com
Approval of electromagnetic compatability according
to the EEC Directive 72/245/EEC and 2006/96/EC
E 13
Approval No: 03 6367
