DLP Texas Instruments vivitek DU8190Z User Manual Download

Page: 8 / 57

DU8190Z DLP Projector - User Manual

UM81900217EN00

Introduction

The User's Manual describes the installation, setup and operation of the DU8190Z projector and provides assistance

to the installation personnel and the end-user to fully develop the performance of the projector. VIVITEK has made

every effort to ensure that the information in the Manual is correct at the time of printing. The contents may be

frequently updated due to the continuously product improvement and customer feedback.

You can find the latest version of the Manual and the manual of other Vivitek products on www.vivitekcorp.com.

Packing Checklist

The following items are included in the packaging box of the DU8190Z series projector. If any loss or damage to any

item, contact your dealer or Vivitek customer service department.

AC Power Cord

VGA Signal Cable

Wired Remote Cable

IR Remote Control

Anti-thief Screw (M4)

(for Lens Installation)

User’s Manual Disc

RoHS Card (China)

Certificate (China)

Summary of Contents for vivitek DU8190Z


























































Search results

Summary of Contents for vivitek DU8190Z

Reviews:

Related manuals for vivitek DU8190Z

Brands by name

Popular brands

DLP Texas Instruments vivitek DU8190Z, User Manual

Search results

Summary of Contents for vivitek DU8190Z

Reviews:

Related manuals for vivitek DU8190Z

Brands by name

Popular brands