Mounting
DLoG MTC 6
User’s Manual V1.00
49
Figure 7.2: Position of the ground bolt
•
The other end of the yellow-green supply voltage cable should be connected to the
vehicle’s chassis.
•
Make sure that the DLoG MTC 6’s connecting cable is attached as close to the
battery as possible. Connecting the DLoG MTC 6 to large electrical loads, such as
converters for the forklift motor may result in random restarts, malfunctions and/or
irreparable damage to the device.
•
If you want to connect devices fed by other power sources to the DLoG MTC 6,
such as printers and so on, be sure to power up the peripheral devices at the same
time or after the DLoG MTC 6. Otherwise, you may encounter start-up problems,
malfunctions or even irreparable damage to the device.
Ground bolt
