Mounting
DLoG MTC 6
User’s Manual V1.00
45
7.
Mounting
The DLoG MTC 6 can be mounted in a variety of ways:
•
It can be positioned horizontally on a desk or mounted on a steering wheel and
vehicle console.
•
Wall mounts are also available for mounting the unit on machines and operating
panels.
•
Roof mounting is also possible, for example under the vehicle roof.
Depending on the vibration resistance and pivoting demands, mounting brackets, clamp
foots or RAM mount elements can also be used to attach the device. Please contact
your DLoG sales office to find out more about the whole range of installation options on
offer.
WARNING
The unit could fall during transit or installation/mounting and cause
injury. Always ensure that there are two persons available when
installing or removing the device.
7.1.
Follow and retain the mounting instructions
Please follow the mounting instructions included with assembly kit when installing your
DLoG MTC 6. Please make sure that you retain the instructions.
Pay careful attention to the
Basic safety guidelines
included in the beginning of this
manual.
7.2.
Mechanical dynamic loading
Since the DLoG MTC 6 is a weighted structure, it is invariable that the unit will be subject
to mechanical dynamic effects. Therefore optimizing the mounting can be necessary.
