DLI LPC9 User Manual Download Page 61

Page: 61 / 81

CONTENTS

Date/time

The Date / Time page allows the administrator to set the internal clock and time zone. The clock may be set within
the browser or synchronized with an NTP server.

Date and Time

Date

/ 15

/ 2016

(MM/DD/YYYY)

Time

: 1

: 57

(HH:MM:SS)

Submit

Sync with Computer Clock

Date/time

The default OpenWrt configuration is to use the NTP servers

3).openwrt.pool.ntp.org

. See

Scripting

scripting to perform manual synchronization.

The preferred time zone can be customized as well.

Time Zone

Submit

UTC+3

Timezone

The selected timezone is used for header date/time display and formatting time in plots.

Internally, the time zone is stored in a format different from the display (it has a different meaning for

and

). You

should take that into account when interpreting related REST API values and log output.

DLI LPC9 User’s Guide: 1.7.24.0

Summary of Contents for LPC9


















































































Search results

Summary of Contents for LPC9

Reviews:

Related manuals for LPC9

Brands by name

Popular brands

DLI LPC9, User Manual

Search results

Summary of Contents for LPC9

Reviews:

Related manuals for LPC9

Brands by name

Popular brands