DLI LPC9 User Manual Download Page 11

Page: 11 / 81

CONTENTS

LCD and keypad

The LCD has 2 lines, 16 character positions each. The displayed data depends on the mode, and possibly also on

user scripting

The keypad has 5 keys:

•

(UP),

•

(DOWN),

•

(ON),

•

(CYCLE),

•

(OFF).

During normal operation, the LPC9 LCD and keypad interface can be in one of the following modes:

• Outlet mode, which displays status of and allows to manipulate the unit's outlets;

• Meter mode, which allows to read measurements of the LPC9 meters and calibrate them;

• Network mode, which displays and allows to configure network settings.

You can cycle through the modes by pressing

and

keys simultaneously.

If the keypad is locked via web UI, the keypad doesn't work, and if you press a key, a message about this is displayed
and stays in place until the next update of the LCD data; no action is taken.

5.1

Outlet mode

At boot, LPC9 starts in Outlet mode.

Outlet mode

In Outlet mode, the

and

keys allow to choose the outlet to display. The first line shows states of all outlets.

The selected outlet is marked by a blinking cursor. Its name is displayed on the second line.

If the outlet is not locked (see below) and its physical state matches the expected state, it is displayed as:

• a plus sign

for outlets that are on, or

• a minus sign

for outlets that are off.

DLI LPC9 User’s Guide: 1.7.24.0

Summary of Contents for LPC9


















































































Search results

Summary of Contents for LPC9

Reviews:

Related manuals for LPC9

Brands by name

Popular brands

DLI LPC9, User Manual

Search results

Summary of Contents for LPC9

Reviews:

Related manuals for LPC9

Brands by name

Popular brands