DLI 7200 Product Manual
Rev. 1
37
Installing Clearance & Airflow
Please ensure that you give a minimum of 2.75 inches of clearance from the
base of the unit. Proper cable routing and clearance will help with less strain on
cables and connectors, while also allowing for better access to the ports.
Please ensure the device is mounted at all times and not laid down on the back
panel. Make sure the device is given a minimum of 1.5 inches of clearance to
allow for proper airflow.
Integrated Power Filtering DC Converter
The DLI 7200 VMC Cradle has an Integrated Power Filter with 10~75V DC/DC Converter.
The DLI 7200 Cradle must be installed post ignition with a 10AMP in-line fuse.
Please consult your fork truck manufacturer for proper installation instructions.
DO NOT connect power to the hydraulics!
Technical Assistance
If you need assistance installing or troubleshooting, please contact your distributor or the Data
Ltd. Inc. Technical Support Office.
North America/Canada:
Telephone:
(800) 526-1299 ext 774 (8 AM to 4 PM CST)
Fax number:
(219) 362-1937
E- mail:
Website:
http://dataltd.com/support-ticket
Product Service and Repair
Data Ltd. Inc. provides service for all its products through service centers throughout North
America. To obtain warranty or non-warranty service, return the unit to Data Ltd. Inc. (postage
paid) with a copy of the dated purchase record attached. Contact the appropriate location below
to obtain a Return Material Authorization number (RMA #) before returning the product.
Telephone:
(800) 526-1299
Fax number:
(219) 362-1937
E-mail:
Website:
http://dataltd.com/rma-request
DC Converter: 10~60V Input
Black
Ground
Red
Positive
Yellow
Ground
Summary of Contents for 7200
Page 1: ...Rev 1 ...
